Pre-Order : Please note logo’s and thumbscrew will be lime green to match RM logo (not blue as photo’d - photo’s will be updated shortly)
Pre-orders will be sent within 10 days of order placement (if not sooner)
Whilst we previously sell a front deeper mount for the Hunter 750, we retired the design.
This new released design has been two years in the making, with numerous prototypes being trialled and design changes made to optimise the mount.
The problems with most front mounts (including our own old original Ridgemonkey front mount) is the water washes over the deeper during forward movement of the boat, this blocks the WiFi signal and drops the connection.
To counter this we have designed a wave breaker bow - which diverts the water arounds of the Deeper whilst creating lift to keep the sonar high in the water.
We’ve also utilised twin articulated arms, this ensures the Deeper is always facing perfectly down and is self regulating to the water regardless of boat loading or chop. We’ve utilised bushes for the pivoting points of the arms, this gives a smoother action rather than pivoting on screws - without excessive play / wobble.
To create a secure mounting point at the front of the boat we’ve made a sandwich plate to simply locate over the original hull joining screws, simply slide the mount adaptor piece onto the hull and tighten using the supplied allen key / Hexagon wrench.
Once fitted the adaptor stays permanently attached to the boat, this takes approx 1 minute.
To fit the Deeper mount simply slide the assembly up into the dovetail of the adaptor…… no fiddly screws, just a simple push on and the mount is secured until removal is required. To remove the Deeper assembly simply push the release button and slide it off.
Manufactured from the highest quality parts available, all hardware is stainless steel, uses plastic welded in CNC Kitchen metal thread adaptors. All screws permanently glued in using Loctite.
(Fits all Deeper sonar models Except the Deeper Start)
Includes Thumbscrew for connection of the Deeper, all screws for fitting of the adaptor & allen key.
Compatible with the RidgeMonkey Hunter 750 ONLY
NOT Compatible with the Hunter 3000
Pre-Order : Please note logo’s and thumbscrew will be lime green to match RM logo (not blue as photo’d - photo’s will be updated shortly)
Pre-orders will be sent within 10 days of order placement (if not sooner)
Whilst we previously sell a front deeper mount for the Hunter 750, we retired the design.
This new released design has been two years in the making, with numerous prototypes being trialled and design changes made to optimise the mount.
The problems with most front mounts (including our own old original Ridgemonkey front mount) is the water washes over the deeper during forward movement of the boat, this blocks the WiFi signal and drops the connection.
To counter this we have designed a wave breaker bow - which diverts the water arounds of the Deeper whilst creating lift to keep the sonar high in the water.
We’ve also utilised twin articulated arms, this ensures the Deeper is always facing perfectly down and is self regulating to the water regardless of boat loading or chop. We’ve utilised bushes for the pivoting points of the arms, this gives a smoother action rather than pivoting on screws - without excessive play / wobble.
To create a secure mounting point at the front of the boat we’ve made a sandwich plate to simply locate over the original hull joining screws, simply slide the mount adaptor piece onto the hull and tighten using the supplied allen key / Hexagon wrench.
Once fitted the adaptor stays permanently attached to the boat, this takes approx 1 minute.
To fit the Deeper mount simply slide the assembly up into the dovetail of the adaptor…… no fiddly screws, just a simple push on and the mount is secured until removal is required. To remove the Deeper assembly simply push the release button and slide it off.
Manufactured from the highest quality parts available, all hardware is stainless steel, uses plastic welded in CNC Kitchen metal thread adaptors. All screws permanently glued in using Loctite.
(Fits all Deeper sonar models Except the Deeper Start)
Includes Thumbscrew for connection of the Deeper, all screws for fitting of the adaptor & allen key.
Compatible with the RidgeMonkey Hunter 750 ONLY
NOT Compatible with the Hunter 3000
