Full Protection PVA dropper designed to keep your PVA bags off the standard door flaps away from the water and sheltered from rain to keep them dry whilst being driven out in the boat.
The PVA Dropper comes with a hinged Lid and self closing flap (when the original hopper door is closed)
The PVA Dropper consists of the following parts :
Main body, this just drops into the hull and has been perfectly matched to the Hull design of the Vulcan Mini, using the full space available between the handle and the rear of the hull.
It also incorporates a cut-out to allow the use of the GS Tackle Drop in Rear Deeper at the same time.
The body is split in half at the rear, to still allow the great top-loading feature of the Vulcan Mini, however is still robust enough for continued use for years to come.
The upper edge of the main body contains a lip that fit’s inside of the lid to stop any water getting in.
Lid, this has been designed to overhang the slot to provide greater protection from rain over the rear line slot.
The lid also incorporates a wedge design that fits into the main body when the lid is closed, this serves two purposes : it creates a nice friction point to keep the lid firmly shut and it also keeps the main body tensioned open.
There is a thumb / finger hole in the front edge of the lid to allow for easy opening of the lid - but also to keep the design flat and easy for storage within the boat for transportation.
Lower hopper Flap, this has been specially designed to have a rounded face to maximise the space for the solid bags due to the compact nature of this bait boat. The flap is automatically reset as the original doors are closed - so no messing around holding the flaps out the way or having to remove the system and reset every time.
Pivoting Bushes / Screws, we utilised the same technology from the Vulcan Rear mount to ensure screws could be fully tightened without “pinching” the body together - this give a nice resistance free loose design without the fear of it coming unattached. To do this we utilise plastic bushes with plastic welded inserts into the flap.
Due to the small size of the boat the Maximum dimensions of finished Solid bags (not the advertised pva bag size - the ready to fish measured size) is approx 46mm (1.8”) in diameter x 100mm (4”) long
Instructions to use :-
Open the hopper doors, insert the PVA dropper.
Close the hopper doors (this automatically closes the bottom flap)
Open the PVA Lid
Open the Rear Latch
Load your PVA bag onto the dropper
Close the rear latch of the boat
Close the lid
When putting out the second rod, please ensure to dry any water from the flap before placing a bag on it !
Manufactured from the highest quality 3D printed PETG filament - will not fade or distort in sunlight
Will be supplied already fully assembled ready to use.
Main body and flap will be black, optional coloured Lid with contrasting logo colour - please make your selection when ordering.
PLEASE NOTE : This PVA dropper is designed for the Vulcan Mini
Some photo’s show boat fitted with GS Tackle Rear Deeper mount - mount is not included in this product.
Compatible with the Vulcan MINI ONLY
NOT Compatible with the Vulcan V1 or V2
Full Protection PVA dropper designed to keep your PVA bags off the standard door flaps away from the water and sheltered from rain to keep them dry whilst being driven out in the boat.
The PVA Dropper comes with a hinged Lid and self closing flap (when the original hopper door is closed)
The PVA Dropper consists of the following parts :
Main body, this just drops into the hull and has been perfectly matched to the Hull design of the Vulcan Mini, using the full space available between the handle and the rear of the hull.
It also incorporates a cut-out to allow the use of the GS Tackle Drop in Rear Deeper at the same time.
The body is split in half at the rear, to still allow the great top-loading feature of the Vulcan Mini, however is still robust enough for continued use for years to come.
The upper edge of the main body contains a lip that fit’s inside of the lid to stop any water getting in.
Lid, this has been designed to overhang the slot to provide greater protection from rain over the rear line slot.
The lid also incorporates a wedge design that fits into the main body when the lid is closed, this serves two purposes : it creates a nice friction point to keep the lid firmly shut and it also keeps the main body tensioned open.
There is a thumb / finger hole in the front edge of the lid to allow for easy opening of the lid - but also to keep the design flat and easy for storage within the boat for transportation.
Lower hopper Flap, this has been specially designed to have a rounded face to maximise the space for the solid bags due to the compact nature of this bait boat. The flap is automatically reset as the original doors are closed - so no messing around holding the flaps out the way or having to remove the system and reset every time.
Pivoting Bushes / Screws, we utilised the same technology from the Vulcan Rear mount to ensure screws could be fully tightened without “pinching” the body together - this give a nice resistance free loose design without the fear of it coming unattached. To do this we utilise plastic bushes with plastic welded inserts into the flap.
Due to the small size of the boat the Maximum dimensions of finished Solid bags (not the advertised pva bag size - the ready to fish measured size) is approx 46mm (1.8”) in diameter x 100mm (4”) long
Instructions to use :-
Open the hopper doors, insert the PVA dropper.
Close the hopper doors (this automatically closes the bottom flap)
Open the PVA Lid
Open the Rear Latch
Load your PVA bag onto the dropper
Close the rear latch of the boat
Close the lid
When putting out the second rod, please ensure to dry any water from the flap before placing a bag on it !
Manufactured from the highest quality 3D printed PETG filament - will not fade or distort in sunlight
Will be supplied already fully assembled ready to use.
Main body and flap will be black, optional coloured Lid with contrasting logo colour - please make your selection when ordering.
PLEASE NOTE : This PVA dropper is designed for the Vulcan Mini
Some photo’s show boat fitted with GS Tackle Rear Deeper mount - mount is not included in this product.
Compatible with the Vulcan MINI ONLY
NOT Compatible with the Vulcan V1 or V2
Image 1 of 16
Image 2 of 16
Image 3 of 16
Image 4 of 16
Image 5 of 16
Image 6 of 16
Image 7 of 16
Image 8 of 16
Image 9 of 16
Image 10 of 16
Image 11 of 16
Image 12 of 16
Image 13 of 16
Image 14 of 16
Image 15 of 16
Image 16 of 16
