Please NOTE this is for a PRE-ORDER - will be shipped after the arrival of the Vulcan Mini Pre-Orders from Boatman
This is to ensure the design is fully optimised to the released version of the boat.
Pre-orders will be processed and dispatched on a first come first served basis.
Please be aware there maybe small changes to the final design, however the functionality and fit can be ensured.
Our hugely popular Vulcan mount has been used as the design basis of this Vulcan Mini Deeper mount, however due to differences between the full size Vulcan and the Mini we have had to change the design to accommodate.
Rear cantilever mounting bracket that utilises the rear slot in the back of the boat to provide a sturdy mounting point for the mounting of the Deeper sonar.
Designed to provide a nice fitting mount that can be quickly fitted and removed if not needed.
Simply open the rear door flap of the boat, load your rig in, then place the mount into the slot - then close the door and the system is ready to use.
The fitting of the mount into the slot is the same as the OEM black plastic piece, therefore it provide protection against tail rubbers being pulled into the slot.
We have designed the mount to utilise bushes for the pivoting points of the arms, this gives a smoother action rather than pivoting on screws - without excessive play / wobble.
The Screws & Nuts are glued together permanently using threadlock - Please do not try and tighten them / adjust them as once the threadlock is broken they can become loose and will need to have threadlock reapplied.
Manufactured from the highest quality 3D printed filament - will not fade or distort in sunlight
Will be supplied already fully assembled - just use the two supplied handy thumbscrews to connect your deeper of choice and drop into the boat and go scan !
(Fits all Deeper sonar models Except the Deeper Start)
Includes Black coated Stainless Steel Fixings, 2 x Thumbscrews.
Compatible with the Vulcan MINI ONLY
NOT Compatible with the Vulcan V1 or V2
Please NOTE this is for a PRE-ORDER - will be shipped after the arrival of the Vulcan Mini Pre-Orders from Boatman
This is to ensure the design is fully optimised to the released version of the boat.
Pre-orders will be processed and dispatched on a first come first served basis.
Please be aware there maybe small changes to the final design, however the functionality and fit can be ensured.
Our hugely popular Vulcan mount has been used as the design basis of this Vulcan Mini Deeper mount, however due to differences between the full size Vulcan and the Mini we have had to change the design to accommodate.
Rear cantilever mounting bracket that utilises the rear slot in the back of the boat to provide a sturdy mounting point for the mounting of the Deeper sonar.
Designed to provide a nice fitting mount that can be quickly fitted and removed if not needed.
Simply open the rear door flap of the boat, load your rig in, then place the mount into the slot - then close the door and the system is ready to use.
The fitting of the mount into the slot is the same as the OEM black plastic piece, therefore it provide protection against tail rubbers being pulled into the slot.
We have designed the mount to utilise bushes for the pivoting points of the arms, this gives a smoother action rather than pivoting on screws - without excessive play / wobble.
The Screws & Nuts are glued together permanently using threadlock - Please do not try and tighten them / adjust them as once the threadlock is broken they can become loose and will need to have threadlock reapplied.
Manufactured from the highest quality 3D printed filament - will not fade or distort in sunlight
Will be supplied already fully assembled - just use the two supplied handy thumbscrews to connect your deeper of choice and drop into the boat and go scan !
(Fits all Deeper sonar models Except the Deeper Start)
Includes Black coated Stainless Steel Fixings, 2 x Thumbscrews.
Compatible with the Vulcan MINI ONLY
NOT Compatible with the Vulcan V1 or V2
